BQJMB - 91-1102 HARDWAX
- MSDS: BQJMB
- Manufacturer: NORTHWEST ANTI CORROSION
- Product Name: 91-1102 HARDWAX
- National Stock Number: 6850-00F026542
Product Identification
Product ID:91-1102 HARDWAX
MSDS Date:02/10/1989
FSC:6850
NIIN:00F026542
MSDS Number: BQJMB
Responsible Party
SEATTLE, WA 98103
US
Emergency Phone: 206-285-6892
Info Phone: 206-284-5400
Cage: GO194
Contractor
Telephone: 206-284-5400
Cage: GO194
Ingredients
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 15%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
CAS: 64742-88-7
Fraction By Weight: 30%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 10%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
ISOBUTANE, 2-METHYLPROPANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 10%
OSHA PEL 1800 MG/CUM
ACGIH TLV: 1000 PPM
4.6 LB/GL (556 G/L)
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, WATERING, BURNS,
STINGING & BLURRED VISION. INHALATION: NOSE, THROAT & LUNG
IRRITATION, COUGHING, HEADACHE, DIZZINESS, NAUSEA, WEAKNESS, LOSS
OF COORDINATION. SKIN: IRRITATION. INGES TION: ASPIRATION HAZARD.
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING & DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: BRAIN & NERVOUS SYSTEM DAMAGE.
UNCONSCIOUSNESS/ASPHYXIATION. INGESTION: ASPIRATION OF SOLVENTS
INTO LUNGS MAY CAUSE CHEMICAL PNEUMONIA. SKIN: DERMATITIS & OTHER
SKIN DISORDERS.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, SENSITIZATION
First Aid
First Aid:INHALATION: IF BREATHING IS DIFFICULT, GIVE OXYGEN. IF
BREATHING STOPS, GIVE ARTIFICIAL RESPIRATION. KEEP WARM & QUIET.
SKIN/EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. INGESTION: IF
CONSCIOUS, GIVE 1/ 2 GLASS MILK OR WATER. DON'T INDUCE VOMITING.
ASPIRATION MAY CAUSE CHEMICAL PNEUMONIA. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:-156F
Lower Limits:0.6%
Upper Limits:9.5%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL EQUIPMENT INCLUDING SELF-CONTAINED
BREATHING APPARATUS. WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE
USED TO COOL HEATED CONTAINER. USE FOG NOZZLES.
Unusual Fire/Explosion Hazard:EXPLOSIVE AIR-VAPOR MIXTURES MAY FORM &
TRAVEL ALONG GROUND TO DISTANT SOURCES OF IGNITION. EXPOSURE TO
HEAT SOURCE MAY CAUSE BURSTING OF CONTAINER.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE AREA.
REMOVE W/INERT ABSORBENT MATERIAL & NON-SPARKING TOOLS. COLLECT
ABSORBENT/SPILL MIXTURE INTO METAL CONTAINERS & ADD ENOUGH WATER TO
COVER.
Handling
Handling and Storage Precautions:DON'T STORE >120F. DON'T PUNCTURE.
AVOID HOT METAL SURFACES. DON'T WELD, DRILL OR HEAT EMPTY
CONTAINERS BECAUSE OF RESIDUE/EXPLOSIVE VAPORS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING & INHALING THE CONENTS CAN BE HARMFUL OR
FATAL. AVOID BREATHING VAPORS & SKIN/EYE CONTACT. USE ONLY
W/ADEQUATE VENTILATI ON.
Exposure Controls
Respiratory Protection:OUTDOOR OR OPEN AREAS, USE FILTER RESPIRATOR OR
PARTICLE MASK. INDOORS, USE NIOSH APPROVED CARTRIDGE RESPIRATOR TO
KEEP VAPOR/MIST LEVELS OCCUPATIONAL EXPOSURE LIMITS
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST TO KEEP CONCENTRATIONS
BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASHES, SAFETY SHOWER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS AFTER USE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:-44F
Vapor Density:>AIR
Spec Gravity:0.8
Evaporation Rate & Reference:FASTER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID W/HYDROCARBON ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, & OXDIZING MATERIALS
Stability Condition to Avoid:TEMPERATURES ABOVE 120F
Hazardous Decomposition Products:CO, CO2, IRRITATING FUMES, SMOKE
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.